 |
|
|
   
|
||
|
|||||||
|
|
|||
|
|||
|
|
Monaural (Mono) Amplifiers are designed to provide a very high level of power in a reasonable-sized box. Interference between channels is completely eliminated as each amplifier handles only one channel of amplification. Mono amplifiers also allow you to place the amplifiers closer to the speakers, minimizing speaker cable lengths. Unlike many mono amplifiers, the Linar 500 is designed and built with 2 separate amplification modules. The input circuitry is common, and then the signal is split into non-inverting and inverted phases. First module drives the positive side of the signal and the second drives the negative side of the signal. The result is a balanced amplifier that cancels out common-mode noise as well as known and unknown sources of distortion, providing you with the highest level of signal integrity possible. Like the other Linar amplifiers, the new Linar 500 amplifier gives you the benefits of both vacuum tube and solid state amplifiers. With the finest MosFet Transistors and an intelligent circuit design, the Linar 500 delivers smooth tube-like sound, while retaining the detail, power, speed, and bass-control of the best solid-state amplifiers. However, unlike tube amplifiers, the Linar 500 can handle very complex loads, being stable down to 2 ohms. The 500 has a straightforward design, free of signal path capacitors. This avoids the problems and limitations in bass frequencies associated with other amplifier designs. Conservatively rated at 500 watts (Mono), the Linar 500 can drive the largest speakers available on the market. With 0 decibels of overall feedback, and a remarkably stable circuit, the 500 has a unique ability to drive capacitive loads. This makes it an ideal choice for users of extremely large, complex, and high-current speaker designs. Like all Linar amplifiers, the power and control of this amplifier do not detract from its ability to deliver all of the music. The Linar 500 can dig out the most subtle micro-details in the source signal and deliver them with finesse. Like the 250i, the Linar 500 is a gentle giant. Continuing the tradition of Victor Sima's designs, the 500 offers you flexibility in connections. The amplifier can be connected with either RCA or XLR interconnects, using either inverting or uninverting inputs. Linar's advanced soft-start and instant-off circuitry limits the in-rush of electrical current during power-up and power-down cycles. This avoids sending potentially damaging noise to the speakers, as well as avoiding damage to AC components. The amplifier is constantly monitoring the output stages for DC voltage. If sensed, the amplifier will turn off automatically to protect the speakers and the audio circuitry. The power, finesse, and flexibility of the Linar 500 make it the right choice for any high-end audio system. Designed for use with the largest and most power-hungry speakers available, the Linar 500 is a world class amplifier, both in terms of sound and power. Download the Owners
Manual and see the Specifications for more details. General Information • Advanced MosFet output transistors • Matched JFet input Transistors • Signal path is free of capacitance • Teflon Isolated RCA Connectors • WBT model 0765 safety line Binding Posts • No overall feedback used in the circuitry • Capable of driving any speaker on the market today • Extremely stable under capacitive and low resistance loads • Advanced Soft Start circuit to limit noise or damage when turning on/off • DC voltage protection circuit to prevent damage to speakers and amplifier • Fully complementary design from input to output • Massive heat sink for improved heat dissipation • Dual 750 VA Toroidal transformers, custom made for Linar Audio
|
||
|
For
info on current products please email us at: Linar |
|||