 |
|
|
   
|
||
|
|||||||
|
|||||||
|
|
Linar
250i Two-Channel The
Linar 250i delivers 150Watts into 2 channels with Zero Feedback configuration.
The new Linar 250i amplifier gives you the benefits of both vacuum tube and solid state amplifiers. With the finest MosFet Transistors and an intelligent circuit design, the 250i delivers smooth tube-like sound, while retaining the detail, power, speed, and bass-control of the best solid-state amplifiers. However, unlike tube amplifiers, the Linar 250i can handle very complex loads, being stable down to 1 ohm. The 250i has a straightforward design, free of signal path capacitors. This avoids the problems and limitations in bass frequencies associated with other amplifier designs. Conservatively rated at 150 watts per channel, the Linar 250i can drive among the largest speakers available on the market. With 0 decibels of overall feedback, and a remarkably stable circuit, the 250i has a unique ability to drive capacitive loads. This makes it an ideal choice for users of large, complex, and high-current speaker designs. The power and control of this amplifier do not detract from its ability to deliver all of the music. The 250i can dig out the most subtle micro-details in the source signal and deliver them with finesse. You might think of the 250i as somewhat of a gentle giant. Continuing the tradition of Victor Sima's designs, the 250i offers you flexibility in both configurations and connections. The amplifier can be connected with either RCA or XLR interconnects, operated in either balanced or unbalanced mode, and allows the user to choose between inverting and uninverting inputs. The 250i can also be bridged into a Balanced Monaural Amplifier that delivers 600 watts into 8 ohms. By splitting a mono signal into positive and negative phases, the 250i can amplify an unbalanced connection in balanced mode. This results in superior sound reproduction. Linar's advanced soft-start and instant-off circuitry limits the in-rush of electrical current during power-up and power-down cycles. This avoids sending potentially damaging noise to the speakers, as well as avoiding damage to AC components. The amplifier is constantly monitoring the output stages for DC voltage. If sensed, the amplifier will turn off automatically to protect the speakers and the audio circuitry. The power, finesse, and flexibility of the Linar 250i make it the right choice for any high-end audio system. Download the Owners
Manual and see the Specifications for more details. General Information • Advanced MosFet output transistors • Matched JFet input Transistors • Signal path is free of capacitance • Teflon Isolated RCA Connectors • WBT model 0765 safety line Binding Posts • No overall feedback used in the circuitry • Capable of driving any speaker on the market today • Extremely stable under capacitive and low resistance loads • Advanced Soft Start circuit to limit noise or damage when turning on/off • DC voltage protection circuit to prevent damage to speakers and amplifier • Fully complementary design from input to output • Massive heat sink for improved heat dissipation • Dual 750
VA Toroidal transformers, custom made for Linar Audio
|
||||||
|
For
info on current products please email us at: Linar |
|||||||