Linar audio Home page
 
 
250 I amplifier
 
500 mono amplifier
 
Preamplifier 2
 
 
Contact Us
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

250i
Specifications		 Linar Audio


High Performance Audiophile
Class A MOSFET Power Amplifier


Output power at 8 ohms 150 watts/ch
Output power at 4 ohms 300 watts/ch
Output power at 2 ohms 600 watts/ch

Total Harmonic Distortion(typically 0.05%)...
Total Intermodulation Distortion.....................
Noise....................................................................
Frequency Response.......................................
Input Impedance................................................
Output Impedance.............................................
Damping Factor.................................................
Input sensitivity RCA inputs.............................
Balance input sensitivity...................................
Gain......................................................................
Channel Separation..........................................
Slew rate..............................................................
Class of operation.............................................
Power consumption at idle..............................
Power Supply......................................................
Weight..................................................................
Dimensions (WxHxD).......................................
Warranty..............................................................		 20-20kHz worst-case 0.4% (typically 0.05%)
Typically 0.05% - Note 1
-110 dB below max power
1Hz-250kHz +0/-3dB
53.3 kW
0.016 W
>  500
1.5 V rms (for max power)
0.75 V rms (for max power)
30 times the input signal or 29dB
>100 DB
Note 2
A, AB
90 W
1280VA  Custom made Toroidal Transformers
28kg (65 lbs) with packaging
45cm x 20cm x 40cm (17.71”x7.87”x15.75”)
3 years parts and labor **





Note 1 - According to IHF-A202 standard for the purpose of this standard F1 shall equal 60Hz,and F2
shall equal 7000Hz the low frequency sine wave having an amplitude 4 times greater than that of the
high frequency sine wave. The measurement of Linar amplifiers are in respect of this standard even
with any frequency combination in any ratio. TIM is a form of dynamic intermodulation distortion that may
be associated with feedback amplifiers that use internal lag compensation.

Note 2 - The amplifier has no global feedback making the slew rate irrelevant.

All measurements carried out at nominal voltage 120 VAC/60Hz or 240VAC/50Hz depending of model.

At Linar Audio we are constantly trying new design ideas to improve our products, therefore we reserve
the right to change or modify product specifications without notice or obligation.

*There may be a small fee to transfer the warranty to subsequent owners. Contact us with the unit's serial number for more info.